This post builds on earlier discussion, How many hours did Johnny work? I recommend you to read that post too.
Lets say you have 2 dates (with time) in cells A1 and A2 indicating starting and ending timestamps of an activity. And you want to calculate how many workings hours the task took. Further, lets assume,
- Start date is in A1 and End date is in A2
- Work day starts at 9 AM and ends at 6PM
- and weekends are holidays
Now, if you were to calculate total number of working hours between 2 given dates, the first step would be to understand the problem thru, lets say a diagram like this:
We would write a formula like this:
=(18/24-MOD(A1,1)+MOD(A2,1)-9/24)*24 + (NETWORKDAYS(A1,A2)-2)*9
See the above illustration to understand this formula.
Now, while this formula is not terribly long or ineffective, it does feel complicated.
May be we can solve the problem in a different way?!?
Michael left an interesting answer to my initial question, how many hours did Johnny work?
Pedro took the formula further with his comment.
The approach behind their formulas is simple and truly out of box.
Instead of calculating how many hours are worked, we try to calculate how many hours are not worked and then subtract this from the total working hours. Simple!
See this illustration:
So the formula becomes:
Total working hours between 2 dates – (hours not worked on starting day + hours not worked on ending day)
=NETWORKDAYS(A1,A2)*9 - (MOD(A1,1)-9/24 + 18/24 -MOD(A2,1))*24
After simplification, the formula becomes,
=NETWORKDAYS(A1,A2)*9 - (MOD(A1,1) -MOD(A2,1))*24 -9
=(NETWORKDAYS(A1,A2)-1)*9 +(MOD(A2,1)-MOD(A1,1))*24
Sixseven also posted an equally elegant formula that uses TIME function instead of MOD()
=(NETWORKDAYS(B3,C3)*9) - ((TIME(HOUR(B3),MINUTE(B3),SECOND(B3))-TIME(9,0,0))*24) - ((TIME(18,0,0)-TIME(HOUR(C3),MINUTE(C3),SECOND(C3)))*24)
Download the solution Workbook and play with it
Click here to download the solution workbook and use it to understand the formulas better.
Thanks to Pedro & Michael & Sixseven & All of you
If someone asks me what is the most valuable part of this site, I would proudly say, “the comments”. Every day, we get tens of insightful comments from around the world teaching us various important techniques, tricks and ideas.
Case in point: the comments by Michael, Pedro and Sixseven on the “how many hours…” post taught me how to think out of box to solve a tricky problem like this with an elegant, simple formula. Thank you very much Michael, Pedro, Sixseven and each and every one of you who comment. 🙂
Have a great weekend everyone.
PS: This weekend is my mom’s birthday, plus it is a minor festival in India. So I am going to eat sumptuously, party vigorously and relax carelessly. Next week is going to be big with launch of excel school 3.
PPS: While at it, you may want to sign up for excel school already. The free lesson offer will vanish on Wednesday.
24 Responses to “10 Supercool UI Improvements in Excel 2010”
The best improvement by far is the Collapse Ribbon ^ button !
Kind of a shame that some of the best improvements are actually returns to old functionality. One thing I don't like is that to get to recent files I need to do an extra click after File - apart from Save As, that's why I'm usually in the File menu. I like the sparkline options, though they are still as not fully featured as some of the free and pay options out there.
The collapse button for the ribbon menu is good news. Can you make the ribbon menus stick too?
Nine improvements, not ten. You can also select multiple objects in 2007. Click on the Find & Select item at the far right of the Home tab, and the dropdown looks remarkably like your 2010 screenshot.
@Jon.. Thank you. Dumb me, I somehow thought we couldnt select objects in Excel 2007. Just saw the "select menu" and it is there. I have corrected the post and removed the point. I have added the "you can make your own ribbons" instead. Thanks once again.
@Arti: what do you mean by make ribbons stick?
@Alex: May be it is my installation, but when I go to "File menu" I see "recent files" by default.
For example, if I am working with one of the contextual ribbon menus (Pivot tables, Drawing/Chart etc), as soon as I click away from the selected object, the menu tabs vanish. If I click on the object again immediately, then Excel will remember what I was looking at, but if I wander away and click on a Pivot, then back again on the Chart, the menus will 'appear' but not get activated, thereby causing much annoyance and additional clicking.
I want to "pin" the whole menu (not invididual commands) somehow, so that I can have the menu there for the length of the time I am working with graphics. Excel 2003 used to have the Drawing toolbar you could detach and hover while you were working, but this functionality disappeared in Excel 2007.
My thought was Excel should just allow a 'pin', similar to the Recently Opened files menu, for the Ribbon Menus as well. If I have not selected any Drawing object, the commands can be greyed out, but I want the menu as a whole to 'stick'.
@Arti... I think MS solved this problem differently. When I select a pivot and go to "design" tab Excel 2010 remembers this and automatically takes me to "design" tab when I reselect the pivot.
Apart from this you can also define your own ribbon with all the things you normally do. See the above article (I have added this after Jon's comments)
Nice feature. About time for a upgrade for MS Office
Oh... okay. That might be a start. I'd probably just copy-paste the Drawing tab haha. Thanks. I'll definitely give Excel 2010 a try.
Btw - have you considered getting into / gotten into the world of Excel as it meets SharePoint?
Actually, the replacement new thing is probably better than all the rest. One thing that the designers of the Office 2007 ignored was allowing regular users to customize their own interface. Office 2010's interface was expanded in this way to address the huge uproar.
Is there still a limit on how many things you can add to the QAT bar? (I'm too lazy to look myself.)
@Jeff.. it seems to take quite a few, but only shows one line and gives a little arrow button at the end. (summary: shucks!)
The best thing is you can edit the ribbon directly from excel, so now i can create my own bar with just the things I use regularly!
One of the annoying things in 07 for me is the Add-Ins menu bar - in 03 I could keystroke directly to menu add ins.. In 07 I needed an extra keystroke just to activate the add-in menu, then the keystrokes as normal.. Hope this marek sense..
John -
If you remember the old Excel 2003 Alt-key shortcuts, you can still use them in 2007. To get to the Add-In dialog:
Alt-T-I
Dear Arti & Chandoo
Seen your comments over some issues. Hope you are form India, gone through your comment expecting a pin to command it as a whole, great, hope if someone out of MS have read it, it may be kept in mind while the next R & D of Office Ver. 16
Just incase someone forgot CTRL+F1 will collapse the ribbon.
[...] was pleasantly surprised when I ran Microsoft Excel 2010 for first time. It felt smooth, fast, responsive and looked great on my [...]
I like the sparklines, and the ability to modify the charts
How do you get rid of the advertisment on the right hand side? If you upgrade then will it take off the ads?
Once again Microsoft has re-decorated the Office and we are NOT pleased!
The graphics object selector can be found in the Home ribbon under Find & Select, Select Objects near the bottom of the drop down. You can make it part of the Quick Access toolbar by right click over it and selecting Add to Quick Access toolbar.
The graphics "cursor" will now appear on the mini-toolbar at the top left of the window.
How to get rid of "Add-Ins" button in Backstage (File)" menu by means of XML code, i.e. to hide, to delete or to disable this button?
This button is usually situated in the Backstage menu between "Help" and "Options" buttons.
Vladimir, did you ever get an answer to your question?
I am tying to customize the ribbon UI for a file using XML, and this is precisely the piece I can't figure out. I can hide other tabs, remove items from QAT and backstage - all except the options that are showing up under add-ins in backstage. If there is an XML syntax for referencing this thing and making it invisible, I cannot find it.
Hey, nice tutorial. Please check my video tutorial on similar topic at the below link and provide your comments:
http://www.youtube.com/watch?v=TeIFc0jYjpA