Today lets tackle a familiar data clean-up problem using Excel – Transposing data.
That is, we want to take all rows in our data & make them columns. Something like this:
The easy solution – use Paste Special > Transpose
Long time Chandoo.org readers already know this. Excel has a built-in feature that lets you transpose data with a single click.
- Just select your original data
- Press CTRL+C to copy
- Go to an empty area and open Paste Special (CTRL+ALT+V)
- Select Transpose.
- Done!
Although this approach works, it creates a copy of your original data. So whenever original numbers change, you must waste precious key strokes & time re-doing the transpose. This is exactly the opposite of awesome.
So, lets move to formulas.
Formula Solution #1 – Using INDEX & Helper cells to transpose a table
Lets say, we have named our original data as myData.
Lets also say myData has 6 rows & 7 columns. That means, the transposed table will have 7 rows & 6 columns.
- Create a 7×6 grid in your worksheet
- About this, write numbers 1 to 6 (cells D20:I20).
- Similarly, write numbers 1 to 7 beside it (cells B23:B29).
- Now use INDEX formula to transpose data like this:
- =INDEX(myData, D$20, $B23)
- Copy this formula all over and you are done!
See the illustration below to understand how this works.
Formula Solution #2 – Using INDEX formula & no helper cells
Sometimes, we cannot really use a helper column. That brings us to our next solution.
In above solution, the helper cells are giving us running numbers from 1 to 6 (and 1 to 7). We can use ROWS() and COLUMNS() formulas to generate these running numbers.
So our new formula will be
=INDEX(myData, COLUMNS($D20:D$20),ROWS($B$23:$B23))
Once you write and copy paste this formula, it will automatically supply the required numbers to INDEX formula and does the magic.
How does it work?
Well, that is for you to figure out. See this illustration to get started.
Formula Solution #3 – Using TRANSPOSE formula
Do you know there is a formula that does all of this. It is called – TRANSPOSE !!!
What is TRANSPOSE formula?
TRANSPOSE formula takes a range of values (or an array) and transposes them and returns another array.
Since this formula always returns an array, we cannot use it in one cell. But we can select a range of cells & then write TRANSPOSE in them and press CTRL+SHIFT+Enter to get the values transposed.
See this demo:
Awesome, isn’t it?
Download Transpose Example Workbook & Play with it
Click here to download the workbook containing all these technique. Play with it to understand these formulas better.
How do you transpose your data?
I prefer using INDEX with ROWS & COLUMNS approach. This is very versatile & elegant. Also this approach lets me extract only a small window of large data set (by offsetting row & column numbers with something like scroll-bar position).
What about you? Which formulas do you use to transpose your data? Please share your tips & ideas using comments.
More formulas for data massaging
If you wrestle often with data & rely on coffee to get going, then you can use some help. Go thru below articles to learn more.
14 Responses to “How to Add your Macros to QAT or Excel toolbars?”
We have only just got excel 2007 so this is helping me navigate my way through the differences cheers.
For Macro's i always add a Command Button, rename it something obvious, change the colour of it and finally add the following to its View Code section.
Application.Run "MAcro1"
This way anyone opening the file knows what to do if i ever win the lottery and dont make it in 🙂
Hi,
Good article. But I have this problem.
1) Customized QAT with a macro. Macro name = MacroX
2) Runs OK from original location (e.g. C:\TestLoaction1\TestFile.xls)
3) Copy past file to new location (e.g. C:\TestLoaction2\TestFile.xls)
Menu button now fails:
Cannot run the macro "C:\TestLoaction1\TestFile.xls'!MacroX' The macro may not be available in this workbook...
Of course the code is there, and macros are enabled.
Could get it to work after deleting and recreating macro custom buttons. So have to re-assign macro to QAT button every time I move the file?
If I put a form button on he worksheet and assign the macro to that, it's location independent.
Any ideas?
Thanks
@Ron
What you have said is correct
Macros within a worksheet are stored within the worksheet and hence follow it.
Macros referenced by a button in the QAT or elsewhere are locaed in a file and if that file is moved the linkages don't follow.
The easiest way around this is to store all your macros in a location that doesn't move and is in fact reloaded everytime that Excel starts and that is called the Personal.xlsx/b file.
These are refered to several time at Chandoo.org or have a read of
http://www.rondebruin.nl/personal.htm
or
http://office.microsoft.com/en-us/excel-help/deploy-your-excel-macros-from-a-central-file-HA001087296.aspx
In Excel 2003 and prior versions, a button added to the Toolbar maintained a DYNAMIC link to the file (e.g. Personal.xlsb) holding the assigned macro, such that if the file was relocated for any reason (by using Excel's native Save As command rather than just moving it via Windows Explorer), the link between the button and the file was updated.
I expected the same to occur with Excel 2007+, but alas, Microsoft in their infinite wisdom have removed another feature useful to advanced users (just as they did by removing the ability to design your own buttons)!!
So having just done some reorganisation of my files, I now have to remove and recreate every friggin macro button on my QAT (I have lots) - what a pain in the proverbial!!
Hi Hui,
Thanks for the help, that's really useful.
1) The macros I'm adding are for one specific Excel application, so I really wanted the macros to follow the file
2) I didn't want to have to pass other files around too and have users installing those - either Personal.xlsx/b or as an Add-In.
3) I realise now that the QAT additions will appear for other Excel workbooks in which I don't want the macros available.
So, it looks like I need to keep it local, by using a button on the worksheet. Unless you can suggest any way of adding to menus just for a specific workbook.
Thanks again for your help. Great site, so I'll be signing up for the emails.
Ron
I know I'm a little late jumping on this post, but wondering if anyone knows how to add a UDF to the QAT? I've saved my UDF in my personal workbook, but it does not show up in my list when I choose Macros when customizing my QAT. Suggestions? Thanks!!
@Cheryl: UDFs cannot be accessed like Macros. You can use them from other macros or from worksheet cells as formulas...
@David: If you save your macros file and then install it as an add-in then it will be always available for you.
The instructions work great when you are creating a new file, and it is still open. I find that I can't access macros after I've saved a file as an xlam and closed it. When I reopen the xlam, either by browsing to it, or by having it set to open as an addin using Excel Options, the macros are no longer available in the macros list when I go to edit the QAT. Any way around that?
[...] Add this macro as a button to Quick Access Toolbar [...]
I need to create a button that will run a macro. Once you click the button it needs to open up a browser asking you to select a report/file. Once you select the file, it will run the macro on the selected file and then save it as a new report with a name and the current date. I created the macro to sort/modify the report but I do not know how to do what I mentioned above. I hope this makes sense.
I'm having trouble adding a macro to the QAT. I've done everything up to step 5 but my macro isn't showing up. What am I doing wrong?
[...] Add Macros to Quick Access Toolbar (works in Excel 2003 & above) [...]
Hi,
Thank you for the explanation. Very useful for a recent switcher from office 2003 to office 2010.
My follow-up question is: in Excel (or ppt) 2010, can you customize the macro button that you put in the QAT?
In office 2003, once you chose the custom button for your Macro, you could then edit pixel by pixel the said button.
For instance, I've created 2 Macros in PPT that are converting all my slides to either English or French language, so I'd like one button to show EN and the other FR... that would be more meaningful that any of the possible "custom" office 2010 buttons
I read all the post and one important aspect to the QAT was never mentioned. That is, you have a macro driven worksheet that you want to share with other. You have customized the QAT with two icons to run the macros (VBA programs in reality). However, when the others receive the workbook, the icons are no where to be found. It's my understanding those "customized buttons" have been saved to an outside file, Excel.qat. QUESTION: Could one simply attach that file to your email, along with the worksheet, and tell the recipients to copy that file to correct location on their computer - C:\Users\\AppData\Local\Microsoft\Office|\
Would the customize macro buttons then appear in the worksheet and, more importantly, work? Thanks for your thoughtfulness and thanks for well written instructions Chandoo!
MortW