Excel Solver Difficult Problem

[tiosonsoner]

Hello,
Fabrics are to be cut to certain sizes.
Example;
24 pieces of 225 cm
32 pieces of 175 cm
88 pieces of 150 cm
24 pieces of 75 cm
32 pieces from 50 cm
80 pieces from 35 cm
These require 304 meters of fabric. One ball of fabric is 6 meters. 51 balls of fabric is enough without any loss, but it will be lost.

225 cm
175cm
150 cm and
50 cm makes a total of 6 meters, but their numbers are different.

I need to adjust it so that the fabric to be used is minimal.
The length of the fabric can be 6 meters in some cases, 6 meters and 3 meters in some cases, and in some cases 6 meters, 3 meters, 8 meters.
It has to be cut. Let the amount of wastage and loss in fabrics be minimal.
How can I do this in excel?

Thank you.

 

[bosco_yip]

Cross posted at: Excel Solver Diffucult Problem | MrExcel Message Board

 

[vletm]

tiosonsoner
Please, reread Forum Rules

Site Rules - New Users - Please Read

Hi all, Welcome to the Chandoo.org Forums. Posting Rules & Etiquette The Chandoo.org Forums is a collaborative and happy place to learn and expand your Excel knowledge. The Chandoo.org Forums consist of several Sub-Forums based on the type of question/area of Excel you are interested in...

chandoo.org

For someway, You seemed to skip those at least two times.

• Cross-Posting. Generally, it is considered poor practice to cross post. That is to post the same question on several forums in the hope of getting a response quicker.
• If you do cross-post, please put that in your post.
• Also if you have cross-posted and get an Solution elsewhere, have the courtesy of posting the Solution here so other readers can learn from the answer also, as well as stopping people wasting their time on your answered question.